Have you ever wished there was a cable from pc to tv that would make connecting your PC to TV possible so you can enjoy that huge screen as a PC? Well, congratulations because your wish is granted. Visit your local computer or electronics shop and ask for a cable from PC to TV and they surely have one. But before you get too excited, you have to be aware that there are some limitations. Nevertheless, the tips below can help you preventing all your efforts from being worthless.

1. Check your television set’s input connection

Many TV sets these days already have three types of inputs. These are the RCA composite input, S-video, and coaxial cable input connector. Recently-manufactured televisions have ready component video, HDMI, VGA, or DVI inputs; however, the RCA composite input, S-video, and coaxial cable input connectors are more common.

2. Check your computer’s output connection

New computers are manufactured with a ready TV-compatible output; therefore, you can quickly hook up cable from PC to TV. In particular, the S-video has become an essential part of computers and it is now very common to see regular computer monitors hook up to a VGA output.

3. Look for the right adapter for your connections.

You need an adapter to connect your cable from PC to TV. This adapter should have a selection of hookups on one end and a VGA adapter on the other. One good thing about this is that it is possible to take the adapter from television to television and it becomes possible to connect to all connectors. A wireless adapter is highly recommended. It may cost a bit higher; however, it is better not to have a mess of big cables and not keeping your PC near your TV set.

4. Start connecting cable from PC to TV

You can hook up the S-video cable to your PC and TV if you are using an S-video jack or a computer output that fits your TV or if not, just hook up the VGA adapter to the PC and just use the RCA cable, S-video, or component video for connecting the TV set. When you think everything is properly connected, it’s time to check if your television set is able to get the computer’s signal. You can do this by using the remote control and pressing its input button.

After the computer’s signal is acquired by your TV, you are done. However, you should be aware that not everything is perfect when you connect the cable from pc to tv because the TV resolution is different from that of the computer. Your computer generates a different signal. The signals are usually in pixels such as 320×200 pixels but televisions can only get around 500 lines of resolution. Moreover, the television video amplifiers are not capable of handling higher resolutions thereby leaving your with a 640×480 maximum resolution. Nevertheless, you can still get an HDTV adapter for higher resolutions but be ready to spend 2 to 3 times higher that a standard adapter.